I started with a piece of Garden Green cardstock for the base of my card. Then, I embossed a piece of Basic White cardstock using the Forever Plaid 3D Embossing Folder and my Cut & Emboss Machine. Next, I adhered the embossed cardstock to the front of the card.
Did you know Stampin’ Up! A Little Bit Festive Designer Series Paper comes with cut outs? My wreath is a cut out! After I punched the wreath out, I adhered it to the front of the card. I used our Festive Glimmer Paper to cut a banner using the Stylish Shapes Dies.
I stamped the sentiment onto Basic White cardstock using Garden Green ink and the stamp set, Christmas Friends. Then, I cut it out using the smaller banner in the Stylish Shapes Dies. I adhered the sentiment to the Glimmer Paper and then added Stampin’ Dimensionals to the back of the Glimmer Paper and adhered it to the wreath.
To complete my card, I added a piece of Basic White cardstock to the inside of the card.
Supply List
Below you’ll find all the Stampin’ Up! supplies I used for today’s card. If you need any stamping supplies, I’d love to be your demonstrator! You can place an order by clicking any of the images below to go to my Stampin’ Up! online store. The Specialty Plate is used with 3D Embossing Folders.
Before sharing my card with you, because it’s my birthday today, I’m going to offer Double Bradley Points for today only, November 21st! You can earn free products when you earn 10 Bradley Points! You earn Bradley Points with every $50 purchase!
I started with a piece of Real Red cardstock for the base of my card. I scored it in two places (you can see the measurements I used below the Supply List) and then used my bone folder to burnish the score lines. On the smaller end (you can see the picture below), I added a strong adhesive, such as Tear & Tape, to both ends and folded up to create the pocket.
I added A Little Bit Festive Designer Series Paper to the top portion on the front and then shut the card so I could apply the bottom part. I cut a piece of Basic White cardstock to put in the pocket and adhered a strip of A Little Bit Festive Designer Series Paper. I will give you the measurements of the exact size but I like to cut it a bit longer than I need and then trim it off.
I stamped the sentiment in Real Red ink onto Basic White cardstock using the Decorative Trees stamp set. I cut the sentiment out using the Stylish Shapes Dies and then cut the next larger circle out of Real Red cardstock. I adhered the sentiment to the Real Red circle, added Stampin’ Dimensionals to the back, on only the upper part, and then adhered it to the upper flap.
Supply List
Below you’ll find all the Stampin’ Up! supplies I used for today’s card. If you need any stamping supplies, I’d love to be your demonstrator! You can place an order by clicking any of the images below to go to my Stampin’ Up! online store.
All the paper and embellishments needed to make three or six cards. Envelopes will also be provided. For this Sampler you only need to provide a stamp set, ink and adhesive (see below for what you’ll need).
A PDF Tutorial with instructions, pictures, cutting measurements and a complete supply list of all the products used.
Earn at least one Bradley Point (earn ten Bradley Points and redeem them for free product) when your order is $50 or more.
If your order is over $150, please do not use the host code or you won’t receive your Stampin’ Rewards. After you place your order, simply email me and let me know that you’d like the Greetings of the Season Card Sampler (you only need to do this if your order is over $150). You can send me an email on the sidebar.
All the Other Important Information:
Your Christmas Cards Card Sampler Samplerwill be shipped first-class mail approximately November 30, 2024 and will be mailed to the address used on your online order.
You’ll receive an email when I mail your Card Sampler and the PDF Tutorial will be included in that email.
When using the Christmas Cards CardSampler host code to place your order, you will not qualify for other current host code rewards.
Per Stampin’ Up! policy, card samplers can only be mailed within the United States.
You’ll receive all the materials to make three or six cards. You’ll quickly have beautiful cards ready to be mailed out to someone special. If you can’t make the cards once they arrive, no worries, each card is labeled in its own clear envelope which makes it easy to come back to later. Once you’ve made all the cards in the Sampler, you’ll be able to easily replicate each card by following the easy to follow directions in the PDF (pictures are included as well).
The special Christmas Cards Card SamplerHOST CODE will close at the end of today, November 20, 2024 and after today, the Card Sampler will no longer be available.
Approximate ship date of the Card Sampler is November 30, 2024.
Listed below are the supplies you’ll need to complete the cards exactly as shown(or you can use what you already own). Simply click any of the products and you’ll be taken to my Stampin’ Up! online store. When placing your order, don’t forget to use the special Card Sampler Host Code(please do not use host code if your order is over $150 – see above).
Please note: One of the sentiments is embossed with Gold Embossing Powder. If you don’t want to emboss the sentiment you can use Garden Green ink.
I started with a piece of Shaded Spruce for the base of my card. Then I embossed a piece of Basic White cardstock using the Snowflake Sky 3D Embossing Folder and my Stampin’ Cut & Emboss Machine. Next, I cut a piece of Sentimental Christmas Designer Series Paper (I like to cut this paper longer than I actually need and then trim it off; I will add the exact dimensions of the finished piece below the Supply List). I then adhered it to the embossed Basic White cardstock and then adhered it to the front of the card.
I stamped the sentiment onto Basic White cardstock using a Versamark ink pad, sprinkled my silver embossing powder over it and then heated it with my heat tool. I used the Stylish Shapes Dies to cut it out, added Stampin’ Dimensionals to the back (I like to use a lot of Dimensionals) and adhered it to the front of the card.
To complete my card, I added three Adhesive-Backed Sparkle Gems in silver, to the front and added a piece of Basic White cardstock to the inside of the card.
How to Heat Emboss
Prepare your cardstock by rubbing the Embossing Buddy (an anti-static pouch that can be found in the Embossing Additions Tool Kit) over the surface of the paper as it helps keep away stray particles of embossing powder. Stamp your sentiment or image using a Versamark pad. This is very sticky ink and your embossing powder will stick right to it. Sprinkle embossing powder over the stamped image and then shake off any excess. Before applying heat to your paper, heat the Heat Tool first so your paper won’t warp (about 10 seconds). Direct the heat over your image and watch as your image becomes shiny and beautiful!
Supply List
Below you’ll find all the Stampin’ Up! supplies I used for today’s card. If you need any stamping supplies, I’d love to be your demonstrator! You can place an order by clicking any of the images below to go to my Stampin’ Up! online store. The Specialty Plate is used with 3D Embossing Folders.
All the paper and embellishments needed to make three or six cards. Envelopes will also be provided. For this Sampler you only need to provide a stamp set, ink and adhesive (see below for what you’ll need).
A PDF Tutorial with instructions, pictures, cutting measurements and a complete supply list of all the products used.
Earn at least one Bradley Point (earn ten Bradley Points and redeem them for free product) when your order is $50 or more.
If your order is over $150, please do not use the host code or you won’t receive your Stampin’ Rewards. After you place your order, simply email me and let me know that you’d like the Greetings of the Season Card Sampler (you only need to do this if your order is over $150). You can send me an email on the sidebar.
All the Other Important Information:
Your Christmas Cards Card Sampler Samplerwill be shipped first-class mail approximately November 30, 2024 and will be mailed to the address used on your online order.
You’ll receive an email when I mail your Card Sampler and the PDF Tutorial will be included in that email.
When using the Christmas Cards CardSampler host code to place your order, you will not qualify for other current host code rewards.
Per Stampin’ Up! policy, card samplers can only be mailed within the United States.
For more information and the supplies you’ll need to complete the Christmas Cards Card Sampler, click here!
Free Drusy Adhesive-Backed Embellishments with an Order of $60 Using the Host Code
New Online Exclusives
New Online Exclusives went live November 5th. Click here to see what’s new!
Two New Stampin’ Up! Kits!
Click each graphic for more information!
December Paper Pumpkin Kit
An additional coordinating add-on is available but only for Paper Pumpkin subscribers. Click the image below for more information.
I started with a piece of Garden Green cardstock for the base of my card. Then I embossed a piece of Very Vanilla cardstock using the Snowflake Sky 3D Embossing Folder (this embossing folder is currently on the Low Inventory List as of this writing) and my Stampin’ Cut & Emboss Machine. Then, I adhered it to the front of the card.
Next, I layered a piece of Gold Foil and Season of Green & Gold Specialty Paper, then adhered it to the middle of the card. I stamped the sentiment in Versamark ink and sprinkled it with gold embossing powder and then used my heat tool to melt the embossing powder. I cut the sentiment out using the Nested Essentials Dies, added Stampin’ Dimensionals to the back and adhered it to the front of the card.
To complete my card, I added another piece of Very Vanilla cardstock to the inside of the card and added five Iridescent Foil Gems to the the front of the card. I chose these gems because they have gold flecks in them which was perfect for my card!
Supply List
Below you’ll find all the Stampin’ Up! supplies I used for today’s card. If you need any stamping supplies, I’d love to be your demonstrator! You can place an order by clicking any of the images below to go to my Stampin’ Up! online store. The Specialty Plate is used with 3D Embossing Folders.
All the paper and embellishments needed to make three or six cards. Envelopes will also be provided. For this Sampler you only need to provide a stamp set, ink and adhesive (see below for what you’ll need).
A PDF Tutorial with instructions, pictures, cutting measurements and a complete supply list of all the products used.
Earn at least one Bradley Point (earn ten Bradley Points and redeem them for free product) when your order is $50 or more.
If your order is over $150, please do not use the host code or you won’t receive your Stampin’ Rewards. After you place your order, simply email me and let me know that you’d like the Greetings of the Season Card Sampler (you only need to do this if your order is over $150). You can send me an email on the sidebar.
All the Other Important Information:
Your Christmas Cards Card Sampler Samplerwill be shipped first-class mail approximately November 30, 2024 and will be mailed to the address used on your online order.
You’ll receive an email when I mail your Card Sampler and the PDF Tutorial will be included in that email.
When using the Christmas Cards CardSampler host code to place your order, you will not qualify for other current host code rewards.
Per Stampin’ Up! policy, card samplers can only be mailed within the United States.
For more information and the supplies you’ll need to complete the Christmas Cards Card Sampler, click here!
Free Drusy Adhesive-Backed Embellishments with an Order of $60 Using the Host Code
New Online Exclusives
New Online Exclusives went live November 5th. Click here to see what’s new!
Two New Stampin’ Up! Kits!
Click each graphic for more information!
December Paper Pumpkin Kit
An additional coordinating add-on is available but only for Paper Pumpkin subscribers. Click the image below for more information.
10% off ink, including pads, refills, markers, and Stampin’ Blends. Ink pad bundles and third-party ink pads are NOT included.
10% off cardstock. Close To My Heart cardstock is NOT included.
20% total off all stamp and die bundles and stamp and punch bundles. (Stamp bundles are normally 10% off. With this sale you get an additional 10% off.)
20% off all Designer Series Paper.
Important Information:
Products are available while supplies last.
Discounts are automatically applied when sale items are added to any order, including Starter Kits.
I started with Real Red cardstock for the base of my card. Then, I added a piece of A Little Bit Festive Specialty Designer Series Paper to the front of my card. I embossed a piece of Basic White cardstock that I embossed using the Snowflake Sky 3D Embossing Folder and my Stampin’ Cut & Emboss Machine. I added the embossed cardstock to a piece of Real Red cardstock, added Stampin’ Dimensionals to the back and adhered it to the front of the card.
Then, I heat embossed my sentiment using the stamp set, Greetings of the Season. If you have never tried heat embossing, I have directions down below. You’ll love the results! I used Gold Embossing Powder because there are flecks of gold in the Christmas tree. I then cut the sentiment out using the Deckled Rectangles Dies.
I punched out the tree (this set comes with three pages of die cuts that you just punch out – how easy is that!), and added Stampin’ Dimensionals to the back. Then, I figured out where I wanted to put the tree and sentiment. I adhered the sentiment to the front and adhered the tree beside it.
How to Heat Emboss
Prepare your cardstock by rubbing the Embossing Buddy (an anti-static pouch that can be found in the Embossing Additions Tool Kit) over the surface of the paper as it helps keep away stray particles of embossing powder. Stamp your sentiment or image using a Versamark pad. This is very sticky ink and your embossing powder will stick right to it. Sprinkle embossing powder over the stamped image and then shake off any excess. Before applying heat to your paper, heat the Heat Toolfirst so your paper won’t warp (about 10 seconds). Direct the heat over your image and watch as your image becomes shiny and beautiful!
Supply List
Below you’ll find all the Stampin’ Up! supplies I used for today’s card. If you need any stamping supplies, I’d love to be your demonstrator! You can place an order by clicking any of the images below to go to my Stampin’ Up! online store. The Specialty Plate is used with 3D Embossing Folders.
Please note: The sale prices are only effective until November 15, 2024.
All the paper and embellishments needed to make three or six cards. Envelopes will also be provided. For this Sampler you only need to provide a stamp set, ink and adhesive (see below for what you’ll need).
A PDF Tutorial with instructions, pictures, cutting measurements and a complete supply list of all the products used.
Earn at least one Bradley Point (earn ten Bradley Points and redeem them for free product) when your order is $50 or more.
If your order is over $150, please do not use the host code or you won’t receive your Stampin’ Rewards. After you place your order, simply email me and let me know that you’d like the Greetings of the Season Card Sampler (you only need to do this if your order is over $150). You can send me an email on the sidebar.
All the Other Important Information:
Your Christmas Cards Card Sampler Samplerwill be shipped first-class mail approximately November 30, 2024 and will be mailed to the address used on your online order.
You’ll receive an email when I mail your Card Sampler and the PDF Tutorial will be included in that email.
When using the Christmas Cards CardSampler host code to place your order, you will not qualify for other current host code rewards.
Per Stampin’ Up! policy, card samplers can only be mailed within the United States.
For more information and the supplies you’ll need to complete the Christmas Cards Card Sampler, click here!
Free Drusy Adhesive-Backed Embellishments with an Order of $60 Using the Host Code
New Online Exclusives
New Online Exclusives went live last week. Click here to see what’s new!
Two New Stampin’ Up! Kits!
Click each graphic for more information!
December Paper Pumpkin Kit
An additional coordinating add-on is available but only for Paper Pumpkin subscribers. Click the image below for more information.
All the paper and embellishments needed to make three or six cards. Envelopes will also be provided. For this Sampler you only need to provide a stamp set, ink and adhesive (see below for what you’ll need).
A PDF Tutorial with instructions, pictures, cutting measurements and a complete supply list of all the products used.
Earn at least one Bradley Point (earn ten Bradley Points and redeem them for free product) when your order is $50 or more.
If your order is over $150, please do not use the host code or you won’t receive your Stampin’ Rewards. After you place your order, simply email me and let me know that you’d like the Christmas Cards Card Sampler (you only need to do this if your order is over $150). You can send me an email on the sidebar.
All the Other Important Information:
Your Christmas Cards Card Sampler Samplerwill be shipped first-class mail approximately November 30, 2024 and will be mailed to the address used on your online order.
You’ll receive an email when I mail your Card Sampler and the PDF Tutorial will be included in that email.
When using the Christmas Cards CardSampler host code to place your order, you will not qualify for other current host code rewards.
Per Stampin’ Up! policy, card samplers can only be mailed within the United States.
You’ll receive all the materials to make three or six cards. You’ll quickly have beautiful cards ready to be mailed out to someone special. If you can’t make the cards once they arrive, no worries, each card is labeled in its own clear envelope which makes it easy to come back to later. Once you’ve made all the cards in the Sampler, you’ll be able to easily replicate each card by following the easy to follow directions in the PDF (pictures are included as well).
The special Christmas Cards Card SamplerHOST CODE will close at the end of the day on November 20, 2024 and after that date, the Card Sampler will no longer be available.
Approximate ship date of the Card Sampler is November 30, 2024.
Listed below are the supplies you’ll need to complete the cards exactly as shown(or you can use what you already own). Simply click any of the products and you’ll be taken to my Stampin’ Up! online store. When placing your order, don’t forget to use the special Card Sampler Host Code(please do not use host code if your order is over $150 – see above).
Please note: One of the sentiments is embossed with Gold Embossing Powder. If you don’t want to emboss the sentiment you can use Garden Green ink.
If you aren’t sure how to use a host code, click here!
The Seasonal Sale Ends Tomorrow!
From the 2024–2025 Annual Catalog:
10% off ink, including pads, refills, markers, and Stampin’ Blends. Ink pad bundles and third-party ink pads are NOT included.
10% off cardstock. Close To My Heart cardstock is NOT included.
20% total off all stamp and die bundles and stamp and punch bundles. (Stamp bundles are normally 10% off. With this sale you get an additional 10% off.)
20% off all Designer Series Paper.
Important Information:
Products are available while supplies last.
Discounts are automatically applied when sale items are added to any order, including Starter Kits.
Free Drusy Adhesive-Backed Embellishments with an Order of $60 Using the Host Code
New Online Exclusives
New Online Exclusives went live last week. Click here to see what’s new!
Two New Stampin’ Up! Kits!
Click each graphic for more information!
December Paper Pumpkin Kit
An additional coordinating add-on is available but only for Paper Pumpkin subscribers. Click the image below for more information.
Before sharing my card with you today, I want to let you know that the Seasonal Sale starts today! You’ll save on products in the Annual Catalog! See below for all the details.
From the 2024–2025 Annual Catalog:
10% off ink, including pads, refills, markers, and Stampin’ Blends. Ink pad bundles and third-party ink pads are NOT included.
10% off cardstock. Close To My Heart cardstock is NOT included.
20% total off all stamp and die bundles and stamp and punch bundles. (Stamp bundles are normally 10% off. With this sale you get an additional 10% off.)
20% off all Designer Series Paper.
Important Information:
Products are available while supplies last.
Discounts are automatically applied when sale items are added to any order, including Starter Kits.
I started with a piece of Blackberry Bliss cardstock for the base of my card. Then, I embossed a piece of Basic White cardstock using the Distressed Tile 3D Embossing Folder and my Stampin’ Cut & Emboss Machine. Once I embossed it, I adhered it to the front of the card.
I cut two pieces of Blackberry Bliss cardstock and two pieces of Regal Winter Designer Series Paper (you can find all the measurements I used below the Supply List). I adhered the DSP to the cardstock and then adhered the long one onto the front of the card. With the square one, I added Stampin’ Dimensionals to the back and adhered it to the front of the card.
I stamped the sentiment onto Basic White cardstock using Blackberry Bliss ink and the stamp set, Unbounded Love. I cut the sentiment out using the Unbounded Love Dies. I then adhered the sentiment to the front of the card.
To complete my card, I added a piece of Basic White cardstock to the inside (I added it after I took the picture).
Supply List
Below you’ll find all the Stampin’ Up! supplies I used for today’s card. If you need any stamping supplies, I’d love to be your demonstrator! You can place an order by clicking any of the images below to go to my Stampin’ Up! online store. The Specialty Plate is used with 3D Embossing Folders.
Before sharing my card with you today, I want to announce that Stampin’ Up! will be having a Seasonal Sale with products from the Annual Catalog beginning November 13, 2024 and ending on November 15th.
From the 2024–2025 Annual Catalog:
10% off ink, including pads, refills, markers, and Stampin’ Blends. Ink pad bundles and third-party ink pads are NOT included.
10% off cardstock. Close To My Heart cardstock is NOT included.
20% total off all stamp and die bundles and stamp and punch bundles. (Stamp bundles are normally 10% off. With this sale you get an additional 10% off.)
20% off all Designer Series Paper.
Important Information:
Products are available while supplies last.
Discounts are automatically applied when sale items are added to any order, including Starter Kits.
When you look at a Z fold on a table and look down at it, it looks like a Z. You can find the measurements I used below the Supply List. I started with a piece of Thick Basic White cardstock and scored it in two places. I folded the card in half and then folded the smaller piece towards the center of the card.
Then, I cut two pieces of Lost Lagoon cardstock and two pieces of Winter Meadow Designer Series Paper (DSP) – this paper is from the Annual Catalog and will be on sale for 20% off beginning on Wednesday! I adhered them together and put one of them on the front of the card and the other inside. I cut another piece of Lost Lagoon cardstock and adhered a piece of Winter Meadow DSP to the right and adhered a piece of Basic White cardstock on the left side.
I stamped the sentiment onto Basic White cardstock using Lost Lagoon ink and the stamp set, Greetings of the Season. I cut it out using the Spotlight on Nature Dies, added Stampin’ Dimensionals to the back, only on the right side and placed it on the front panel.
Supply List
Below you’ll find all the Stampin’ Up! supplies I used for today’s card. If you need any stamping supplies, I’d love to be your demonstrator! You can place an order by clicking any of the images below to go to my Stampin’ Up! online store.
I started with a piece of Real Red cardstock for the base of my card. Then, I cut a piece of Sentimental Christmas Designer Series Paper and adhered it to the front of the card. Next, I cut another piece of Real Red cardstock and embossed a piece of Basic White cardstock using the Painted Trees 3D Embossing Folder and my Stampin’ Cut & Emboss Machine. I adhered the embossed cardstock to the front of the Real Red cardstock, added Stampin’ Dimensionals to the back and adhered it to the front of the card.
I used the Sentimental Wishes Dies to cut the stocking out of Sentimental Christmas Designer Series Paper. I added Stampin’ Dimensionals to the back and then set it aside.
I stamped the sentiment onto Basic White cardstock using Real Red ink and the stamp set, Greetings of the Season. I then cut it out using the Deckled Rectangles Dies (I made sure that I cut it over to the left as far as possible because it would be too long). I adhered the sentiment to the front of the card and then added the stocking to the right of it being sure to cover the excess part of the sentiment.
To complete my card, I added a piece of Basic White cardstock to the inside. You can find all the measurements I used below the Supply List.
Supply List
Below you’ll find all the Stampin’ Up! supplies I used for today’s card. If you need any stamping supplies, I’d love to be your demonstrator! You can place an order by clicking any of the images below to go to my Stampin’ Up! online store. The Specialty Plate is used with 3D Embossing Folders.
I started with a piece of Real Red cardstock for the base of my card. Then, I embossed a piece of Basic White cardstock using the Painted Trees 3D Embossing Folder and my Stampin’ Cut & Emboss Machine and adhered it to the card base.
I stamped the bear in Memento Ink onto Basic White cardstock using the Christmas Friends stamp set and then colored him with Stampin’ Blends. The colors I used were Real Red (dark) and Granny Apple Green (dark). Once I had the bear colored, I then cut him out using the Animal Friends Dies. I added Stampin’ Dimensionals to the back of the bear and then set him aside.
I stamped the sentiment onto Basic White cardstock using Real Red ink and the Christmas Friends stamp set. Then, I cut the sentiment out using the second smallest banner in the Nested Essentials Dies. I figured out where I wanted the bear to be and the sentiment and then glued the sentiment onto the front of the card and then placed the bear on top of the sentiment being sure to cover the banner openings. To complete my card, I added a piece of Basic White cardstock to the inside of the card. This card came together quickly!
Supply List
Below you’ll find all the Stampin’ Up! supplies I used for today’s card. If you need any stamping supplies, I’d love to be your demonstrator! You can place an order by clicking any of the images below to go to my Stampin’ Up! online store. The Specialty Plate is used with 3D Embossing Folders.
Before sharing my card with you today, I want to let you know that many fun, new Online Exclusives are going live today! You can shop the new Online Exclusives here!
I’ve been MIA for over ten days because I had a toothache which necessitated a root canal but I could only get half of it done because my gums had become swollen. I was a mess! TMI, but I wanted you to know why I’ve been gone. On to my card!
I’m using new products that are available today!
The new products I’ve used are:
Hearts of Elegance Bundle #164916 (which includes the Hearts of Elegance stamp set and the Hearts of Elegance dies)
I also used the Everyday Details Dies. As I’m writing this (November 4th), the Online Exclusives are not available yet but they are now!
I started with a piece of Real Red cardstock for the base of my card. Then I added a layer to the front of my card of Basic White cardstock with Marbled Elegance Specialty Designer Series Paper. Next, I used the Hearts of Elegance Dies to cut a heart out of Real Red and Gold Foil. I adhered the gold foil one with Stampin’ Seal and the red one I popped up with Stampin’ Dimensionals.
I stamped the sentiment onto Basic White cardstock using Real Red ink and the Hearts of Elegance stamp set. Then, I cut it out using the Everyday Details Dies, added Stampin’ Dimensionals to the back and adhered it to the card front. I added two Adhesive-Backed Heart Sequins to the sentiment and three more around the card front.
To complete my card I added a piece of Basic White cardstock to the inside.
Supply List
Below you’ll find all the Stampin’ Up! supplies I used for today’s card. If you need any stamping supplies, I’d love to be your demonstrator! You can place an order by clicking any of the images below to go to my Stampin’ Up! online store. I also used:
Hearts of Elegance Bundle #164916 (which includes the Hearts of Elegance stamp set and the Hearts of Elegance dies)
